Automatic Corrugated Carton Multiple Color Printing Slotting Die Cutting Machine
| Printing units |
Chosen according to users' needs |
| Printing Paperboard |
A.B.C.E 3/5/7 layer corrugated board |
| Machine Speed |
120 sheets/min |
| Economy speed |
80-100 sheets/min |
| Max. Paper Size |
2200×3700 mm |
| Max. Printing Size |
2200×3600mm |
| Max. die cutting size |
2200×3600mm |
| Min. Paper Sizes |
600*900mm |
| Max.slot depth |
565mm |
| Printing precision |
±1mm |
Printing-plate adjustment
left and right position |
10mm |
| Standard Printing Plate Thickness |
4-9mm |
| Cardboard thickness |
2-12mm |
| Max. slit corner Width |
50mm |
| Max. stack height |
1600mm |
Printing Roller
(Plus Printing Plate Thickness) |
720mm |
- The total machine adopt PLC controlling system
- Whole machine frame and important part are being aging treatment, tempering eliminate the stress of metallic; all of them come from high precision processing center, CNC grinding machining process. All the rollers are high quality steel, high precision Computer dynamic balancing correction of hard chromium plating, surface grinding.
- The transmission gear adopt 40 CrMnTi high quality alloy steel which is grinded and after the heat treatment ,it can up to six precision, Its surface with rockwell hardness HRC58-62, make color more accuracy.
- Units separate is electrical controlled and pneumatic locking, pneumatic total lock, to ensure the stability of the unit, and continue ring for caution when machine be separated, to ensure the safety of operating person.
- Every unit of machine with emergency stop switch, so the machine can be stopped between the unit, it can ensure the workers safe (remark: every unit moving is drag by feeder unit)
- All the machine electric parts application keyless connecting ring, eliminating the gap generated by the traditional connection, keep the long-term precision of printing chromatic.
- The machine lubrication system uses a spray automatic lubrication, and with the device impermeable to oil spills institutions.
Feeding unit
1) The control panel is controlled by two system, one is controlled by buttons and other is controlled by touch screen
2) Production capacity can be set by infrared photoelectric counter in advance, which will show the production number.
3) The distance between left and right baffle is controlled by electrical, show by ruler. The front baffle gap is adjusted by manually ,behind baffle gas by electrical.
4) Paper feeding and ink feeding work together in order, it will reduce the waste paper quantity.
5) Feeding by four rollers transmission adsorbing with 15KW wind motor, which make sure the paper pass smoothly.
6) The dust removing device is available.
7)Main motor is frequency converting control, which ensures the machine starting/running in smooth condition. Energy saving 30%.
8)Total lock function for whole machine ,it can avoid machine damage by mis-operation.
9)Feeding roller adopt double rollers structure, upper roller is wrapped with elastic rubber, which does not broke the strength of corrugated board, more longer service life.
10) Upper roller diameter of behind feeding device is ф150 mm, upper roller diameter of front feeding device is ф190 mm, thick-walled seamless steel pipe, wrapped in plastic wear phase, that is to maintain flexibility and ensure that the surface wear and reduce the squash into the board.
12)lower roller diameter of front and behind feeding device is ф190 mm, quenched and tempered seamless steel grinding the surface of hard chromium plated embossed and treatment.
13) The transmission uses two roller drive Oldham Coupling, reducing wear and tear to make the drive more stable.
14) the use of electric sub-machine fit, with a continuous alarm warning lights the move to ensure the safety of operations.
15) shaft with electromagnetic friction clutch, to prevent malfunction or overload protection of the motor will not burn.
16) feeder, printing department, the Department of cutting electric automatic zero.
17) Pneumatic interlocking device.
Printing unit
1, the printing roller
1) The diameter of printing roller is ф708 mm (including plate thickness will be ф720mm)
2) Printing roller is made in high quality thick-walled seamless steel roll, surface conditioning, grinding, hard chromium plating. balance correction, smooth operation.
3) hanging tube axis, side lock, so hanging on the bit accurate, convenient and fast.
4) full-groove peg board for hanging bar 10mm.
5) handling print, the foot switch is convenient and flexible electric control reversing.
2, the embossing roller
1) embossing roller diameter ф190mm.
2) thick-walled seamless steel pipe, surface grinding, hard chromium plating.
3) balance correction, smooth operation.
4) Gas adjustment between rollers adopt self-locking gear box control,show in dial ranged from 0 to 12mm
3, ink roller
1) roller diameter ф240 mm (line number 200 Line -280 lines).
2) thick-walled seamless steel surface after grinding the surface of ground, pressed textured, hard chrome plating.
3) the same network, even on the ink, printing plates and rubber roller to extend service life.
4) pneumatic feeding system with automatic lifting device (network printing and print exposure roll down, stop printing, anilox roller and plate separation increased).
5) The roller gap structure manually adjust the range of 0-12mm.
4 ink distributing rollers
1) diameter ф215 mm.
2) High quality seamless steel pipe wrapped durable, corrosion resistant, wear-resistant rubber.
3) special high rubber roller grinding, diameter 2.2-2.5 mm, transfer ink effect.
4) rubber roller gap adjustment lock structure by hand, adjust the range of 0-12mm.
5, Phase adjustment
1) The planetary gear structure.
2) printing phase digitally controlled by computer and electric adjustment of 360 ° (run, stop can be adjusted.) the accuracy is 0.15mm.
3) print roller bits used to adjust the frequency control. Zero and the adjusted version of fast, high precision tune version.
4) the use of electric mechanical horizontal adjustment phase, the control of ± 5 mm.
5) The whole auto-zero in each group, the accuracy is 0.5mm, and then automatically adjusts the phase, try one, and then enter the number of fine-tuning, greatly reducing the waste of cardboard
6, ink loop structure
1) pneumatic diaphragm pump for ink stability, operation and maintenance simple.
2) The ink filter, filter impurities.
7, the printing phase fixtures
1) Electromagnetic clutch brake type brake mechanism, when the unit adjusting the phase separation, the brake mechanism limits gears to keep the original tooth position of fixed points.
8,direction of rollers adjusted by electrical ,ranged ± 10 mm.
slotting unit
1)Single shaft double knives slotter,7.0 inch touchscreen on the slotter, the box length and box width are motorized,box height is controlled by PLC and can be stored in the computer, saving the changing time in future.
2)The upper knife,lower knife, pre-creaser and creaser are synchronously moved. The precision liner slideway can ensure the flexible and stable of moving.
3)The up creaser wheel is covered by rubber anvil to protect the corrugated board from damage.
4)Flexible corner cutting knife can cut 3,5 and 7 layer corrugated board without adjustment.Easy to operate.
5)The cutting knife is made of high quality alloy steel, knife thickness 7mm.
6)Hand hole punching device is optional.
7)upper slotting knife diamater is 240 mm,lower slotting knife diameter is 190 mm,both of them is adopted dynamic balance technical.
8)creasing roller diameter is 110 mm with dynamic balance technical.
Die cutting unit
the die cutter roller (the roller)
1) die cutter roller diameter ф672.4mm (excluding die cutter)
2) Steel material, surface grinding, hard chromium plating.
3) balance correction, increase the operating stability.
4) die cutter screw hole spacing 50 mm ×52.78 mm.
5) for die cutter height 25.4mm.
2, pad roller (upper roller)
1) diameter φ643.95mm
2) Steel Research surface grinding, chrome plating
3) balance correction, increase the operating stability
4) to manually adjust the gap with the cutting die.
5) The pad thickness 11.4 mm (diameter of φ666.75 mm)
6) The mechanical lateral 40 mm, swimming device
3, Phase adjustment
1) The planetary gear-type structure, with the printing department.
2) cutting to bits by PLC, touch screen control and electric adjustment of digital 360 ° (run, stop can be adjusted.)
- 3) use PLC ,screen control the lateral displacement , can adjust right and left 10mm.
- 4) machine with the rubber roller amend device , can amend the roller, then the die cutter part can be used as new, it can amend 8 million to 10 million times, then it can save the cost much.
- 5) knives die roller is come from casting steel, grinding surface.
- Knives die height 25.4mm
- Wooden knives die 16-18 mm(3 layers)
- 17-15.3(5 layers)
- 6) rubber pad roller is from seamless steel pipe, grinding the face and hard chromium plating. It can be more stable when running, mechanical adjust 40mm move device. It can prolong the using life.
- 7) die knives adjustment adopt self -lock device.
- 8) rubber pad roller with Speed difference compensation device, can
- make sure after grinding the roller ,the speed is same speed with
- knives die roller, to make the size is same with before
upper and lower rollers will separate when it stop working,it can reduce the wear of rubber roller.
1) The paper can then manually adjust automatically.
2) splicing speed and feed speed is synchronization, then the paper speed can be adjusted independently
3) The stack height of 1600 mm
4) bed units lifting strength chain drive.
5) The splicing platform equipped with anti-fall device to ensure operator safety.
6) take action paper hanging pressure plates stacked in cardboard to a certain height, then lift up out of cardboard board automatically.
7) plane wrinkle belt, to prevent the cardboard down.
8) received a separate paper to adjust the belt tension arm, without the belt length limit. Automatic Corrugated Carton Printing Slotting Die Cutting Machine
Packaging & Shipping
After the machine is finished and running well, it will be coated with anti-rust oil, which makes the machine not easy to rust in the container, and winding film to prevent moisture. Each unit of the machine will be fixed in the container to ensure a stable and safe arrival at the destination.
Our Services
1. OEM service are available.
2. Trade Manager online, also contact by Email.
3. To solve problems by pictures/videos.
4. Engineers are available service abroad.
PS: Normally our machines are uneasy to broken because of our
professional machine making team and strict QC team, we will
also send you our manual and video, what you need to do is just
learn some basic thing such as machine maintenance.
FAQ
1. Are you a factory or trading company?
We are both a factory and a trading company in this field .
2. What is the terms of payment you accept?
We usually accept the T/T payment, we need 30% of total amount as deposit,
pay the 70% balance before delivery, but we can also accept the L/C.
3. Where is your factory located ? How can I visit there?
Our factory located in Dongguang County, Hebei Province, China., near to the
capital city Beijing and port Tianjin. You can fly to Beijing airport directly and we
will pick you up there.
4. How does your factory do regarding quality control?
Quality is priority. We always regard great importance to quality controlling from the very small thing(even a small screw we will choose the best quality) from the beginning.
Contact Information:
If you are interested in our products,
please fell free to contact and visit me.
You are welcome all the time!
Mobil:0086 18713707985
Audited Supplier 
){kind=link}