Lead edge Feeding Corrugated Sheet Flexo Printing slotting Machine
Function and Characteristics:
-- Adopt PLC control the phase adjustment of each printing unit, operate easily.
-- All transmission rollers are made of high quality steel, plate with the hard chromium, surface is ground.
-- Driving gears are made of 40Cr high grade alloy steel and ground, the Rockwell hardness is ≥ 50 after the heat treatment.
-- Each unit adopt electric separating and pneumatic locking and whole locking. The alarm rings during the walking to ensure the safety of the operator. Different type of alarm sounding for start and stop the machine.
-- Using two hands together to press the start to button to ensure the safety of the operator.
-- There is dead-stop button in the front, middle and back of the machine.
-- There is instruction light (LED three-color instruction light) for the equipment electrifying, awaiting working and in unusual condition.
-- There is a dead-stop button in each unit of printing machine, the operator can stop each unit when in the middle of each unit to keep the operator safety.
Main technological parameter(the size of the machine can be designed based on clients requirement)
NO. |
Parameter |
|
Model |
410-2600 |
480-3000 |
530-2600 |
1 |
Inner width |
mm |
2600 |
3000 |
2600 |
2 |
Max. Paper size |
mm |
1200x2600 |
1450x3000 |
1600x2600 |
3 |
Max. Printing size |
Mm |
1250x2400 |
1450x2700 |
1600x2200 |
4 |
Interval feeding size |
mm |
1400x2400 |
1600x2700 |
1900x2400 |
5 |
Max. speed |
Pcs /min |
150 |
120 |
6 |
Economic speed |
Pcs /min |
0-120 |
0-100 |
7 |
Topping precision |
mm |
±0.5 |
±0.5 |
8 |
Standard plate thickness |
mm |
7.2 |
7.2 |
9 |
Cardboard thickness |
mm |
2-11 |
2-11 |
10 |
Min. slotting interval |
mm |
165x165x165x165 |
165x165x165x165 |
11 |
Max. slotting depth |
mm |
320 |
380
|
Unit moving.
Each unit is electric moving left and right with warning bell. When unit moving, the bell will be
warning to make sure the operator safe. The moving motor with constant torsional moment which
can buffer the impact of the two units when the operation is wrong.
The constant torsional box is Shandong brand, 2 years warranty (no shortage of lubricating oil)
After all the units closed, each part is pneumatic locked. There is also lead locked cylinder which
can make each part locked with bottom-track lock. If the cylinder is not locked, the main motor will
not work.
Lead-edge feeding system.
Wind absorbing auxiliary paperboard feeding, can make the cardboard feed favoringly. The
volume of the wind can be adjusted accord the camber of the paperboard.
Electric control the side baffles move left and right. Electric control the behind baffles move back
and front. The distance between the frontal baffles and the feed table is synchronous manual
adjusted.
The touch screen can be input the production plan and also show the produce sheets number.
Once the plan is finished, the system stops the feeding part and warns.
Dust clean.
Brush dust-removal equipment with dust-absorption blower. This equipment can clear the dust
on the surface of the cardboard, improve the printing quality.
Cardboard feeding roller.
The up cardboard feeding roller is steel tube, the dia 99mm, be covered with the hardwearing
rubber.
The down cardboard feeding roller is steel tube embossing and hard chromium plating.
The distance between the up cardboard feeding roller and down cardboard feeding roller is
adjusted by hands, while the dial show the adjust date, the adjusting scope is 2-12mm.The up and
down feed roller adopt the crosshead connect with the drive gears, when adjust the distance
between the up and down rollers, the distance between the two driver gears of the up and down
rollers will not changed.
"Automatic zero-returning" and "printing plate cleaned memory" function.
.The feed unit, printing unit, slotting unit have electric "Automatic zero-returning" function, and the
printing unit have "printing plate cleaned memory" function.
Usually adjust the printing roller, slotting knife roller to the right printing location; it only need try to
feed very less sheets with use The "Automatic zero-returning" and "printing block cleaned memory"
function. Decrease the cardboard waste.
The printing roller
The printing roller is steel material, after balance correction and grinded, polished and hard
chromium plating. The diameter 435mm.
The printing-plate-reel / plate hang-up structure is adopted. The pedal switch control the printing
roller run clockwise and anticlockwise, can change printing plate easy.
The press printing roller.
The press printing roller adopts seamless steel tube, after balance correction. The dia 156mm.
The surface of the down press printing roller is grinded, polished and hard chromium plating.
The distance between the printing roller and down press printing roller is adjusted by hands
wheel, while the dial show the adjust date, the adjusting scope is 2-12mm.The printing and down
press printing roller adopt the crosshead connect with the drive gears, when adjust the distance
between the two rollers, the distance between the two driver gears of the two rollers will not
changed, ensure the high precision for the carton, and low noise of the machine, and long life of the
gears.
The anilox roller
The material of the anilox roller is steel, usually choose 200#-220# 250# 280#.
The steel anilox roller surface adopts advanced chromium plating. Smoothness and hard
wearing. The dia 213mm, Dalian brand, 1 year warranty.
The Pneumatic control Up-down device of the anilox roller is synchronous with the cardboard
feeding system.(when the cardboard be fed,the anilox roller is go down and touch the printing plate,
when cardboard feeding is stop, the anilox roller will go up and separated from the printing plate.)
The rubber roller
The rubber roller is steel roller covered with hardwearing rubber, this roller is especially grinded,
and after balance correction .the surface's diameter in middle part of rubber roller is bigger than two
sides, so as to obtain good effect of ink transmission.
The Up and down cardboard feeding roller
The up and down cardboard feeding roller with four cardboard feed wheels. The up cardboard
feeding roller is steel tube , been grinded, polished and hard chromium plating.
The distance between the up and down cardboard feeding roller is adjusted by hands, while the
dial show the adjust date, the adjusting scope is 2-12mm.The up and down cardboard feeding roller
adopt the crosshead connect with the drive gears, when adjust the distance between the two rollers,
the distance between the two driver gears of the two rollers will not changed, ensure the high
precision for the carton, and low noise of the machine, and long life of the gears.
The adjustment device of the printing roller.
The clockwise and the anticlockwise phase of the printing roller is adjusted by the PLC and
electricity, Input the adjust data and 360° could be adjusted while the machine running or stop.
The horizontal move of the printing roller is adjusted by PLC with electricity; the adjusting
distance is 20mm.
The "Automatic zero-returning" and "printing plate cleaned memory" function can make the
machine adjust the printing plate to the right printing location quickly.(The "Automatic zero-returning"
function is for clear the print plate, when you use this function, the printing roller will automatic run
to the best location which for wash the print plate, after finish washing, "printing plate cleaned
memory" can make the print roller automatic return to the most proximate location before wash the
printing plate, it will save time for adjust the print block again after clear printing plate)
Inking system.
Inking system adopts pneumatic diaphragm pump inking with the ink cup to prevent the ink
splashing. Steady inking and easy to maintain.
Have ink dust filter, make the ink more clear, and improve the printing effect.
When the machine stop, the anilox roller and rubber roller could running independently for
transmission ink and prevent the ink drying out.
PLC touch screen controller on phase.
Packaging & Shipping
After the machine is finished and running well, it will be coated with anti-rust oil, which makes the machine not easy to rust in the container, and winding film to prevent moisture. Each unit of the machine will be fixed in the container to ensure a stable and safe arrival at the destination.
Our Services
1. OEM service are available.
2. Trade Manager online, also contact by Email.
3. To solve problems by pictures/videos.
4. Engineers are available service abroad.
PS: Normally our machines are uneasy to broken because of our
professional machine making team and strict QC team, we will
also send you our manual and video, what you need to do is just
learn some basic thing such as machine maintenance.
FAQ
1. Are you a factory or trading company?
We are both a factory and a trading company in this field .
2. What is the terms of payment you accept?
We usually accept the T/T payment, we need 30% of total amount as deposit,
pay the 70% balance before delivery, but we can also accept the L/C.
3. Where is your factory located ? How can I visit there?
Our factory located in Dongguang County, Hebei Province, China., near to the
capital city Beijing and port Tianjin. You can fly to Beijing airport directly and we
will pick you up there.
4. How does your factory do regarding quality control?
Quality is priority. We always regard great importance to quality controlling from the very small thing(even a small screw we will choose the best quality) from the beginning.
Contact Information:
If you are interested in our products,
please fell free to contact and visit me.
You are welcome all the time!
ABOUT US:
Hebei Dongguang North Pack Co.,Ltd is located in Hebei Province Dongguang County, Packaging Machinery Industry Area. We are specialized in the production of Carton packaging Machinery . We have advanced production processing equipment and high-quality technical and management personnel. Mainly produces3/5/7 layer Corrugated Cardboard Production Line, medium and high speed FLEXO Ink Printing Machine, Slotting Machine, Die-cutting Machine, Stitching Machine, Gluing Machine, stitching machine and other related series equipment. Our company has the import and export rights, products have been exported to Russia, Iran, Turkey, Egypt, India, Pakistan, the United Arab Emirates, Mesico, Brazil and other countries and regions.
Company selling machines
Audited Supplier 
){kind=link}